Gestetner CP6143L Operating Instructions Manual page 57

C2678608_Platinum-EN.book Page 51 Sunday, February 12, 2006 10:53 PM
E
With the number keys, enter the
number of prints for each class,
and then press the {q} key.
Note
❒ Repeat Steps
all your classes.
F
Press the {OK} key.
G
Press the {Clear Modes/Energy Sav-
er} key.
The contents that you have stored
are now effective.
Storing Class Mode Settings
A
Press the {User Tools} key.
B
Use the {U}{T} keys to select 4
Initial Settings, and then press
the {OK} key.
D E
and to register
ANT140S
C
Use the {U}{T} keys to select 6
Program/Change Class, and then
press the {OK} key.
D
Use the {U}{T} keys to select a
number, and then press the {OK}
key.
Note
❒ If the number is already in use,
a message will be displayed
asking if you wish to overwrite
the settings stored. To over-
write, press the {OK} key. Oth-
erwise press the {Escape} key to
return to the previous display,
and then select another number.
E
With the number keys, enter the
number of prints, and then press
the {q} key.
Printing Functions
3
51