Changing The Settings Of Service Programs - Gestetner 5308L User Manual

SilverV-EN.book Page 58 Monday, May 15, 2000 3:23 PM
Service Program Mode

Changing the Settings of Service Programs

A
After entering the desired SP No., press the { { { { q
3
The value or mode set at the factory will be displayed at the end of the second
line on the guidance display.
Note
If you designate the wrong SP No., press the {Clear Modes/Energy Saver}
key. Then, re-enter the desired SP No.
B
Enter the desired value or mode with the number keys.
C
Press the { { { { q q } } } } key to store the desired value or mode.
q q
Note
If you enter the wrong value or mode, press the {Clear Modes/Energy Saver}
key. Then, go back to step A.
58
q } } } } key. q q
TSLS01TN
TSLS011N
TSLS01TN