Setting Originals In The Document Feeder - Gestetner 5308L User Manual

SilverV-EN.book Page 45 Monday, May 15, 2000 3:23 PM

Setting Originals in the Document Feeder

Note
If you set one original into the document feeder while another original is still
on the exposure glass, the original set into the document feeder will be
scanned first.
A
Adjust the guide to the original size.
B
Insert the aligned originals face up in the document feeder until they stop.
Limitation
Approximately 30 originals (64g/m
the 30 originals document feeder. The first (top) original will be fed first.
Note
Do not insert different size originals at the same time.
The guides must fit snugly against both sides of the stack.
Printing Using the Optional 30 Originals Document Feeder
TSLH011E
TSLH012E
2
, 17 lb) can be inserted at one time in
2
45