Table of Contents
Advertisement
Printing with Windows
Printing with a Windows 2000/XP
or Windows NT Print Server
This section describes procedures for
setting up a client on a network using
Windows 2000/XP, Windows NT
Server or Windows NT Workstation
as a print server.
When using a Windows 2000/XP or
Windows NT print server, select a
shared printer on Windows 2000/XP
or Windows NT.
This section describes running [Add
Printer Wizard] on each client compu-
ter, and adding the Windows 2000,
Windows XP, and Windows NT 4.0
print servers as the network printer.
The instructions are given using Win-
dows 98.
Limitation
❒ When using a print server connect-
ed to the machine with SmartNet-
Monitor for Client, you cannot use
Recovery Printing and Parallel
Printing.
Windows 2000
Windows XP
Windows NT 4.0
Print Server
Client
GPNETKAJ
❒ When using Windows XP as a
print server, the client computer
cannot receive notification of print
job completion.
Note
❒ This section assumes that the client
has already been configured to
communicate with a Windows
2000/XP or Windows NT print
server. Do not begin the following
procedure until the client has been
set up and configured correctly.
❒ When using Windows NT 4.0 as
the print server, make sure to in-
stall the Windows NT 4.0 printer
driver before connecting the print
server. There is a Windows NT 4.0
printer driver on the CD-ROM la-
beled "Printer Drivers and Utili-
ties".
A A A A
Click the [Start] button, point to
[Settings], and then click [Printers].
B B B B
Click the icon of the printer you
want to use. On the [File] menu,
click [Properties].
C C C C
Click the [Details] tab, and then
click [Add Port].
D D D D
Click [Network], and then click
[Browse].
E E E E
On the network tree, double-click
the name of the computer used as
the print server.
The printers connected to the net-
work are displayed.
F F F F
Click the name of the printer you
want to use, and then click [OK].
G G G G
Click [OK].
Printing with Windows
35
5
Advertisement
Table of Contents
