3. Setting Up the Machine on
User Tools Menu (System Settings)
This section describes the network settings you can change with User Tools (sys-
tem settings). Make settings according to functions you want to use and the in-
terface to be connected.
Important
❒ These settings should be made by the systems administrator or after consult-
ing with the systems administrator.
Note
❒ For more information about setting the machine up on a network, see p.13
"Setting Up the Machine on a Network".
❖ ❖ ❖ ❖ Viewing the Information Displayed in the List
$ These items must be set to use the function. Be sure to set them before us-
ing the corresponding function.
❍ These items must be set if required.
Printer (LAN-Fax)
Interface
Ethernet
IEEE 1394 (IP over
1394)
Interface Set-
tings/Network
⇒ p.21
Interface Set-
*1
tings/IEEE 1394
⇒ p.22
Interface Set-
tings/Network
⇒ p.21
a Network
Settings
IP Address
Gateway Address
Effective Protocol
NW Frame Type
*2
LAN Type
Ethernet Speed
Host Name
IP Address
IP over 1394
Gateway Address
Host Name
$
❍
❍
❍
$
❍
❍
$
$
❍
❍
13