Table of Contents
Advertisement
Chapter 4
I want to:
How
can I do
that?
Deny or allow specific wireless client devices to access my
network by their MAC addresses.
For
example, you want the wireless client A with the MAC
address 00:0A:EB:B0:00:0B and the wireless client B with the
MAC address 00:0A:EB:00:07:5F to access the router, but other
wireless clients cannot access the router
1. Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
2. Go to
Wireless
>
3. Click
Enable
to enable the Wireless MAC Filtering function.
4. Select
Allow the stations specified by any enabled entries in
the list to access
5. Delete all or disable all entries if there are any entries already.
6. Click
Add New
and fill in the blank.
1 ) Enter the MAC address 00:0A:EB:B0:00:0B/00:0A:EB:00:
07:5F in the MAC Address field.
2 ) Enter wireless client A/B in the Description field.
3 ) Select
Enabled
4 ) Click
Save
and click Back.
7. The configured filtering rules should be listed as the picture
shows below.
Wireless MAC
Filtering.
as the filtering rule.
in the Status drop-down list.
31
Advertisement
Table of Contents
