Chapter 5
3. Customize guest network permissions.
•
Allow Guest To Access My Local Network
local network and manage it.
•
Guest Network Isolation
•
Enable Guest Network Bandwidth Control
Bandwidth Control rules will take effect.
Note:
The range of bandwidth for guest network is calculated according to the setting of Bandwidth Control on the
Bandwidth Control
page.
4. Select a band and enable the
5. Create a network name for your guest network.
6. Configure the
Security
Personal
and create a password for the guest network.
7. Click Save.
5. 8.
DHCP
By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the
router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices
from the IP Address Pool. You can change the settings of DHCP Server if necessary,
and you can reserve LAN IP addresses for specified client devices.
- If enabled, guests are isolated from each other.
Guest Network
type. To configure a secure network, select
- If enabled, guests can access the
- If enabled, the Guest Network
function.
WPA/WPA2 -
87