Wps - TP-Link C50V5 User Manual

Chapter 4
• Key Type - This option should be chosen according to the AP's security configuration.
It is recommended that the security type is the same as your AP's security type
• WEP Index - This option should be chosen if the key type is WEP(ASCII) or WEP(HEX).
It indicates the index of the WEP key.
• Authentication Type
WEP(HEX). It indicates the authorization type of the Root AP.
• Encryption - Please select encryption type base on the source AP.
• Password - If the AP your Router is going to connect needs password, you need to fill
the password in this blank.
4. 6. 2.

WPS

WPS (Wi-Fi Protected Setup) can help you to quickly and securely connect to a network.
This section will guide you to add a wireless device to your router's network via WPS.
Note:
The WPS function cannot be configured if the wireless function of the router is disabled. Please make sure the wireless
function is enabled before configuration.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Wireless > WPS.
3. Follow a method below to connect your client device to the router's Wi-Fi network.
Method 1: Press the WPS Buttons on the Router and Client Device
For details, refer to
Method 2: Press the WPS Button on Your Client Device
1. Keep the WPS Status as
2. Select Press the WPS button of the new device within the next two minutes
Connect.
- This option should be chosen if the key type is WEP(ASCII) or
Method 3: Use the WPS button
Enabled and click
of Connect Your
Add Device.
Router.
and click
26