Dhcp Client List - TP-Link TL-MR6400 User Manual

DHCP Server - Enable

have another DHCP server within your network or else you must configure the computer
manually.
Start IP Address - Specify an IP address for the DHCP Server to start with when assigning

IP addresses. 192.168.1.100 is the default start address.
End IP Address - Specify an IP address for the DHCP Server to end with when assigning

IP addresses. 192.168.1.199 is the default end address.
Address Lease Time

be allowed connection to the router with their current dynamic IP Address. Enter the
amount of time in minutes and the user will be "leased" this dynamic IP Address. After the
time is up, the user will be automatically assigned a new dynamic IP address. The range
of the time is 1 ~ 2880 minutes. The default value is 120 minutes.
Default Gateway - (Optional) Suggest to input the IP address of the LAN port of the router,

default value is 192.168.1.1.
Default Domain - (Optional) Input the domain name of your network.

Primary DNS - (Optional) Input the DNS IP address provided by your ISP. Or consult your

ISP.
Secondary DNS

provides two DNS servers.

Note:
To use the DHCP server function of the router, you must configure all computers on the LAN as
"Obtain an IP address automatically" mode. This function will take effect until this device reboots.
Click Save to make the settings effective.
4.9.2

DHCP Client List

Go to DHCP DHCP Client
→
attached to the router in the next screen.
ID - The index of the DHCP Client.

Client Name - The name of the DHCP client.

MAC Address - The MAC address of the DHCP client.

Assigned IP - The IP address that the router has allocated to the DHCP client.

or Disable the DHCP server. If you disable the Server, you must
- The Address Lease Time
- (Optional) Input the IP address of another DNS server if your ISP
List, and then you can view the information about the clients
is the amount of time a network user will
-42-
TL-MR6400 User Guide