Table of Contents
Advertisement
Chapter 4
•
IP Address
- Enter the IP address in dotted-decimal notation provided by your ISP.
•
Subnet Mask
- Enter the subnet mask in dotted-decimal notation provided by your
ISP. Normally 255.255.255.0 is used as the subnet mask.
•
Gateway
- Enter the gateway IP address in dotted-decimal notation provided by your
ISP.
•
Primary/Secondary DNS Server
dotted-decimal notation provided by your ISP.
•
MTU (Bytes)
- The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. It is not recommended that you change the default MTU size
unless required by your ISP.
PPPoE
If your ISP provides PPPoE connection, select PPPoE.
•
Username/Password
fields are case-sensitive.
•
Confirm Password
password you entered is correct.
•
Secondary Connection
an extra connection type, select
connection.
- (Optional) Enter one or two DNS addresses in
- Enter the user name and password provided by your ISP. These
- Enter the password provided by your ISP again to ensure the
- It's available only for PPPoE connection. If your ISP provides
Dynamic IP
or
Static IP
to activate the secondary
17
Advertisement
Table of Contents
