Table of Contents
Advertisement
•
On Windows XP
1 ) If you see the message
usually because windows configuration utility is disabled or you are running another
wireless configuration tool to connect the wireless.
2 ) Exit the wireless configuration tool (the TP-Link Utility, for example).
3 ) Select and right click
Management window.
4 ) Expand
Services and Applications
Configuration
5 ) Right click
Wireless Zero
6 ) Change
Startup type
Started. And then click OK.
If you can find other wireless network except your own, please follow the steps below:
• Check the WLAN LED indicator on your wireless router/modem.
• Make sure your computer/device is still in the range of your router/modem. Move closer if it is
currently too far away.
If you can find your wireless network but fail to connect, please follow the steps below:
• Authenticating problem/password mismatch:
1 ) Sometimes you will be asked to type in a PIN number when you connect to the wireless
network for the first time. This PIN number is different from the Wireless Password/
Network Security Key. Usually you can only find it on the label of your router.
2 ) If you cannot find the PIN or PIN failed, you may choose
key
instead, and then type in the
3 ) If it continues to show note of
confirm the wireless password of your wireless router.
Note: Wireless Password/Network Security Key is case sensitive.
Windows cannot configure this wireless
My Computer
in the Services list on the right side.
Configuration, and then select Properties.
to Automatic, click
Wireless Password/Network Security
Network Security Key
on Desktop, and select
> Services, and find and locate
Start
and make sure the Service status is
Mismatch, it is suggested to
connection, this is
Manage
to open Computer
Wireless Zero
Connecting using a security
Key.
106
Advertisement
Table of Contents
