Chapter 4
•
Wireless Radio
enabled or disabled.
•
Name(SSID)
•
Mode
- The current wireless mode which the router works on.
•
Channel
- The current wireless channel in use.
•
Channel Width
•
MAC Address
•
WDS Status
•
WAN
- This field displays the current settings of the WAN, and you can configure them
on the
Network
>
•
MAC Address
•
IP Address
or 0.0.0.0 if the IP Address is assigned dynamically and there is no internet
connection.
•
Subnet Mask
•
Default Gateway
Dynamic IP as the internet connection type, click
obtain new IP parameters dynamically from the ISP or release them.
•
DNS Server
•
System Up Time
reset.
Click
Refresh
to get the latest status and settings of the router.
4. 2.
Quick Setup
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
Quick
Setup.
3. Click
Next
to start. Then follow the step-by-step instructions to connect your router
to the internet.
- Indicates whether the wireless radio feature of the Router is
- The SSID of the Router.
- The current wireless channel width in use.
- The physical address of the router.
- The status of the WDS connection is displayed.
WAN
page.
- The physical address of the Internet port.
- The current WAN (Internet) IP Address. This field will be blank
- The subnet mask associated with the WAN IP Address.
- The Gateway currently used is shown here. When you use
- The IP addresses of DNS (Domain Name System) server.
- The length of the time since the router was last powered on or
Renew
or
Release
here to
14