Arp List - TP-Link C50V5 User Manual

Chapter 4
3. Enter the MAC address and IP address.
4. Click Save.
To modify or delete an existing entry:
1. Select the desired entry in the table.
2. Click Edit or Delete

4. 15. 2. ARP List

To manage a device, you can observe the device on the LAN by checking its MAC
address and IP address on the ARP list, and you can also configure the items. This page
displays the ARP list which shows all the existing IP & MAC Binding entries.
• MAC Address - The MAC address of the listed computer on the LAN.
• IP Address - The assigned IP address of the listed computer on the LAN.
• Status - Indicates whether or not the MAC and IP addresses are bound.
• Click the Load Selected
• Click the Delete Selected
list.
• Click the Refresh
Note:
An item can not be loaded to the IP & MAC Binding list if the IP address of the item has been loaded before. Error warning
will prompt as well. Likewise,
Selected.
button to load the selected items to the IP & MAC Binding list.
button to delete the selected items to the IP & MAC Binding
button to refresh all items.
Load All only loads the items without interference to the IP & MAC Binding list.
54