Basic Operation For Sending A Fax - Ricoh SP C261SFNw User Manual

6. Sending and Receiving a Fax
• The Internet Fax function supported by this machine is compliant with ITU-T Recommendation T.37
(Simple Mode).
• To use the Internet Fax function, network settings must be configured properly. For details about
network settings, see page 295 "Configuring the Network Settings".
• Internet Fax transmission may take some time before it starts. The machine needs a certain amount
of time to convert data in memory prior to transmission.
• Depending on e-mail environment conditions, you may not be able to fax large images.
• The "Photo" resolution is not available for Internet Faxes. Faxes will be sent using "Detail" resolution
if "Photo" resolution has been specified.
• If the faxes are received on a computer, a viewer application needs to be installed in order to view
the documents.

Basic Operation for Sending a Fax

• The original in the ADF takes precedence over the original on the exposure glass if you place
originals both in the ADF and on the exposure glass.
1. Press the [Home] key.
2. Press the [Fax] icon on the [Home] screen.
3. Place the original on the exposure glass or in the ADF.
To place the originals, see page 77 "Placing Originals".
4. Select the [Fax] (
5. Select [Address Book], [Manual Entry], or [Redial].
6. Enter the fax number (up to 40 characters), or specify a destination.
• For details about entering characters, see page 42 "Entering Characters".
188
DUE302
) tab or [Internet Fax] ( ) tab.