Ricoh SP C261SFNw User Manual page 258

7. Configuring the Machine Using the Control Panel
Item
Dial/Push
Phone
PSTN / PBX
PBX Access
Number
Function Priority Specifies the mode that is
256
Description
Specifies the line type of the
telephone line.
To configure this setting,
contact your telephone
company and select the
setting based on your
telephone line. Selecting a
wrong setting may cause
failures in fax transmissions.
[Dial Phone (20PPS)] may
not appear depending on
the country/region setting of
the machine.
Sets the machine to connect
to the public switched
telephone network (PSTN) or
a private branch exchange
(PBX).
Specifies the dial number to
access the outside line when
the machine is connected to
a PBX.
Make sure that this setting
matches the setting of your
PBX. Otherwise, you may not
be able to send faxes to
outside destinations.
activated when the power is
turned on, or if the time
specified for [System Reset
Timer] elapses without
activity while the initial
screen of the current mode is
displayed.
Value
• Push Phone
• Dial Phone (10PPS)
• Dial Phone (20PPS)
Default: [Push Phone]
• PSTN
• PBX
Default: [PSTN]
0 to 999
Default: 9
• Home
• Copier
• Facsimile
• Scanner
Default: [Home]