Ricoh SP C261SFNw User Manual page 385

Printing
Problem
Print is slanted.
Misfeeds occur frequently.
Printed copies are together,
resulting in jams.
Copy paper becomes
creased.
Edges of sheets are
creased.
Black lines appear on the
file printed at the
destination.
Causes
The paper is fed at a slant.
The number sheets loaded
in the paper tray exceeds
the capacity of the machine.
The paper tray's side fence
is set too tightly.
The paper is too thick or too
thin.
Printed paper is being used.
Sheets are sticking together.
Sheets are sticking together.
Printed paper is being used.
The paper is too thin.
You are using a non-
recommended paper.
The exposure glass,
exposure glass, exposure
glass cover, or guide plate
of the ADF is dirty.
Solutions
Load the paper correctly. For details
about loading paper, see page 48
"Loading Paper".
Load paper only as high as the upper
limit markings inside the paper tray.
Pinch the fence lightly, and then adjust
its position.
Use the recommended paper. For
details about the recommended paper,
see page 63 "Supported Paper".
Do not load sheets that have already
been copied or printed.
Fan the sheets thoroughly before
loading them. Alternatively, feed the
sheets into the machine one at a time.
Fan the sheets thoroughly before
loading them. Alternatively, feed the
sheets into the machine one at a time.
Do not load sheets that have already
been copied or printed.
Use the recommended paper. For
details about the recommended paper,
see page 63 "Supported Paper".
Use the recommended paper. For
details about the recommended paper,
see page 63 "Supported Paper".
Clean the components. For details
about how to clean the machine, see
page 336 "Cleaning the Exposure
Glass".
Fax Problems
383