Table of Contents
Advertisement
Understanding the printer menus
Use
Timeouts
Standby Mode
Disabled
1–240
Timeouts
Sleep Mode
Disabled
1–120
Timeouts
Print with Display Off
Allow printing with display off
Display on when printing
Timeouts
Hibernate Timeout
Disabled
20 minutes
1 hour
2 hours
3 hours
6 hours
1 day
2 days
3 days
1 week
2 weeks
1 month
Hibernate Timeout on Connection
Hibernate
Do Not Hibernate
Timeouts
Screen Timeout
15–300
Timeouts
Print Timeout
Disabled
1–255
To
Set the idle time before the printer enters a lower power state.
Note: 15 minutes is the factory default setting.
Set the idle time before the printer begins operating in Sleep
mode.
Notes:
•
20 minutes is the factory default setting.
•
Disabled appears only when Energy Conserve is set to
Off.
Print a job with the display turned off.
Note: Display on when printing is the factory default setting.
Set the time before the printer enters Hibernate mode.
Note: 3 days is the factory default setting.
Set the printer to Hibernate mode even if there is an active
Ethernet connection.
Note: Do Not Hibernate is the factory default setting.
Set the idle time before the display automatically returns to
Ready state.
Note: 30 seconds is the factory default setting.
Set the printer to end a print job after it has been idle for the
specified amount of time.
Notes:
•
90 seconds is the factory default setting.
•
Print Timeout is available only when using PCL
emulation.
157
Advertisement
Table of Contents
