Table of Contents
Advertisement
User's Guide
Registering or Editing Grouped Contacts
Adding contacts to a group allows you to send a fax or send a scanned image by an email to multiple destinations
at the same time.
1. Select Settings on the home screen.
2. Select Contacts Manager, and then select Register/Delete.
3. Do one of the following.
❏ To register a new group, select Add Entry, and then select Add Group.
❏ To edit a group, select the target group, and then select Edit.
❏ To delete a group, select the target group, select Delete, and then select Yes. You do not have to perform
following procedures.
4. When registering a new group, select the type of group you want to register. Skip this procedure when you
want to edit a group.
❏ Fax: Register a contact (fax number) to send a fax.
❏ Email: Register an email address to send a scanned image or to forward the received fax.
5. Enter or edit the Group Name (Required) for the group.
6. Select Contact(s) Added to the Group (Required).
7. Select the contacts that you want to register in the group.
Note:
❏ You can register up to 200 contacts.
❏ To deselect a contact, tap it again.
8. Select Close.
9. Make the other necessary settings.
❏ Registry Number: Set the number for a group.
❏ Index Word: Set index word for the group.
❏ Assign to Frequent Use: Register as a frequently used group. The group is displayed at the top of the screen
where you specify the address.
10. Select OK.
Registering Frequently Used Contacts
When you register frequently used contacts, the contacts are displayed at the top of the screen where you specify
the address.
1. Select Settings on the home screen.
2. Select Contacts Manager, and then select Frequent.
3. Select the type of contact you want to register.
Preparing the Printer
45
Advertisement
Table of Contents
