Table of Contents
Advertisement
User's Guide
Important:
c
❏ Do not load more than the maximum number of sheets specified for the paper. For plain paper, do not load
above the line just under the triangle symbol inside the edge guide.
❏ Load paper short edge first. However, when you have set the long edge as the width of the user defined size,
load paper long edge first.
Pre-punched paper
Note:
You can use pre-punched paper under the following conditions. Automatic 2-sided printing is not available for
prepunched paper.
❏ Loading capacity: One sheet
❏ Available size: A4, B5, A5, A6, Letter, Legal
❏ Binding holes: Do not load paper with the binding holes at the top or the bottom.
Adjust the print position of your file to avoid printing over the holes.
4. Slide the edge guides to the edges of the paper.
5. On the control panel, set the size and type of the paper you loaded in the rear paper feed.
Note:
You can also display the paper size and paper type settings screen by pressing the
Preparing the Printer
32
button on the control panel.
Advertisement
Table of Contents
