Table of Contents
Advertisement
User's Guide
Solving Problems
Checking the Printer Status
Checking Messages on the LCD Screen
If an error message is displayed on the LCD screen, follow the on-screen instructions or the solutions below to
solve the problem.
Error Messages
Printer error. Turn the power off and on again. If
the problem persists, contact Epson Support.
Printer error. Contact Epson Support. Non-
printing features are available.
Printer error. For details, see your
documentation.
Paper out in XX. Load paper. Paper Size: XX/
Paper Type: XX
Too many paper cassette units are installed. Turn
the power off and uninstall the extra units. See
your documentation for details.
Cannot print because XX is out of order. You can
print from another cassette.
You need to replace Ink Supply Unit.
Paper Setup Auto Display is set to Off. Some
features may not be available. For details, see
your documentation.
Solving Problems
Solutions
❏ Remove any paper or protective material in the printer and the paper
cassette. If the error message is still displayed after turning the power
off and on again, contact Epson support.
❏ When the following error codes are displayed, check the paper for
the maximum number of sheets that can be loaded in each paper
source.
000181, 000184
The printer may be damaged. Contact Epson support or an authorised
Epson service provider to request repairs. However, non-printing
features such as scanning are available.
The printer may be damaged. Contact Epson support or an authorised
Epson service provider to request repairs.
Load paper, and then insert the paper cassette all the way.
You can install up to one optional paper cassette unit. For other optional
paper cassette units, uninstall them by following the reverse steps to
installation.
Turn the power off and on again, and then reinsert the paper cassette. If
the error message is still displayed, contact Epson support or an
authorised Epson service provider to request repairs.
To ensure you receive premium print quality and to help protect your
print head, a variable ink safety reserve remains in the ink supply unit
when your printer indicates it is time to replace the ink supply unit.
Replace with a new ink supply unit.
If Paper Setup Auto Display is disabled, you cannot use AirPrint.
187
Advertisement
Table of Contents
