Testing The Printer; Loading Paper - Epson AcuLaser C2000 Setup Manual

2. Make sure that the printer is turned off. It is off when the N
side of the power switch on the left side of the printer is
pushed in.
3. Connect the power cord to the AC inlet on the left side of the
printer.
4. Plug the power cord into a properly grounded electrical
outlet.

Testing the Printer

To test whether the printer is set up correctly, print a status sheet.
The status sheet contains information about the printer, including
the current settings. To print a status sheet, follow the procedures
below. You will have to first load the MP tray with paper.

Loading paper

Follow these steps to load paper into the MP tray:
1. Fan a stack of A4 or Letter size paper, then tap it on a flat
surface to even the edges.
O N
P O
W E
R
O F
F
Testing and Connecting the Printer
47