Epson AcuLaser C2000 Setup Manual page 37

12. Attach the plastic piece onto the hook on the side, as shown
below.
13. Gently close the printer's right cover.
14. Plug the printer's power cord into an electrical outlet.
15. Turn on the printer.
To confirm that the Duplex Unit is installed correctly, print a
status sheet. If the unit is not listed on the status sheet, make sure
the electronic connectors connecting the Duplex Unit to the
printer are connected securely. For instructions on how to print a
status sheet, see "Printing a status sheet" on page 48.
31
Installing the Options