Table of Contents
Advertisement
Testing the printer
To test whether the printer is set up correctly, print a status sheet.
The status sheet contains information about the printer and the
installed options, including the current settings. To print a status
sheet, follow the steps below.
Loading paper
1. Open the MP tray if it is closed against the body of the printer.
Pull out the extension if necessary.
2. Fan a stack of A4 or Letter size paper and tap it on a flat surface
to even its edges. With the printable side down, load the stack
by inserting it all the way into the tray. Make sure the paper
lies below the arrows on the paper guide. Adjust the guide to
match the size of your paper.
Testing and Connecting the Printer
printable side
down
59
Advertisement
Table of Contents
