Epson AcuLaser C2000 Setup Manual page 21

5. Hold the photoconductor unit as shown below, and insert it
firmly into the slot making sure that the bottom of the unit
slide into the guide rails.
Note:
Make sure that the unit is completely inserted into the slot.
Otherwise, the lever cannot be restored to a position that
accommodates the waste toner collector.
6. While keeping the photoconductor unit in place with your left
hand, pull the ring toward you to remove the protective sheet.
c
Caution:
Failure to remove the protective sheet may damage your
printer.
Assembling the Printer
15