Epson AcuLaser C2000 Setup Manual page 48

c
6. Replace the circuit board cover and fasten the screws.
7. Plug the printer's power cord into an electrical outlet.
8. Turn on the printer.
To confirm that the ROM module is installed correctly, print a
status sheet. If the module is not listed on the status sheet, try
reinstalling the module. Make sure that it is securely fastened to
the ROM slot on the printer. For instructions on how to print a
status sheet, see "Printing a status sheet" on page 48.
42
Installing the Options
Caution:
Do not force the ROM module into the slot.
Be sure to insert the module facing the correct way.