Assembling The Printer; Installing The Developer Cartridges - Epson AcuLaser C2000 Setup Manual

3

Assembling the Printer

Before assembling the printer, make sure that all protective
materials packed around and inside your printer are removed.
Follow the instructions in the Unpacking Guide to remove these
materials.
Note:
Keep all packing materials as you will need them when transporting the
printer.

Installing the Developer Cartridges

Before installing the developer cartridges, read the following
handling precautions:
If toner gets onto your skin or clothes, wash it off with soap
and water immediately.
Wait for at least one hour before installing a developer
cartridge after moving it from a cool to a warm environment
to prevent damage from condensation.
You need to install four developer cartridges into the printer.
Follow these steps to install the developer cartridges:
8
Assembling the Printer