Epson AcuLaser C2000 Setup Manual page 8

CAUTION Hot Surface
Avoid Contact
Avoid touching the components inside the printer unless
instructed to do so in this guide.
Never force the printer's components into place. Although the
printer is designed to be sturdy, rough handling can damage
it.
When handling the developer cartridges, always place them
on a clean, smooth surface.
Do not attempt to modify or take the developer cartridge
apart. It cannot be refilled.
Do not touch the toner and avoid all contact with your eyes.
Do not dispose of used developer cartridges, photoconductor
units, fuser oil rolls, or waste toner collectors in fire, as they
can explode and cause injury. Dispose of them according to
local regulations.
Wait for at least one hour before using a developer cartridge
or a photoconductor unit after moving it from a cool to a warm
environment to prevent damage from condensation.
2
Safety Instructions