Supermicro C7Q270-CB-ML Motherboard User's Manual
2-5 Motherboard Installation
All motherboards have standard mounting holes to fit different types of
chassis. Make sure that the locations of all the mounting holes for both
motherboard and chassis match. Although a chassis may have both plas-
tic and metal mounting fasteners, metal ones are highly recommended
because they ground the motherboard to the chassis. Make sure that the
metal standoffs click in or are screwed in tightly. Then use a screwdriver
to secure the motherboard onto the motherboard tray.
Philips Screwdriver (1)
Tools Needed
JPME2:
1-2:NORMAL
2-3:ME MANUFACTURING MODE
JL1:
CHASSIS
INTRUSION
I-SATA4
I-SATA5
Location of Mounting Holes
Attention! 1) To avoid damaging the motherboard and its compo-
nents, please do not use a force greater than 8 lb/inch on each mount-
ing screw during motherboard installation. 2) Some components are
very close to the mounting holes. Please take precautionary measures
to avoid damaging these components when installing the motherboard
to the chassis.
Philips Screws (8)
BIOS LICENSE
B1
JBT1
JBT1:CMOS CLEAR
LED1
JSTBY1
CLEAR
CMOS
JSTBY1:
5V STBY POWER
POWER
BUTTON
RESET
BUTTON
I-SATA2
I-SATA0
I-SATA3
I-SATA1
LAN
USB 4/5(3.0)
HD AUDIO
USB 6/7(3.0)
2280
2260
2242
CPU
PCIE M.2
CONNECTOR 1
SYS_FAN1
2-12
Standoffs (8)
Only if Needed
KB/MOUSE
DVI
HDMI/DP
USB 0/1
JVR1
JI2C1/JI2C2
JPUSB1:USB0/1 WAKE UP
ON :ENABLE
1-2 ENABLE
OFF:DISABLE
2-3 DISABLE
DIMMA1
DIMMA2
DIMMB1
DIMMB2
JPW1