Graphics Turbo Imon Current; Skip Scanning Of External Gfx Card; Primary Display; Select Pcie Card - Supermicro Supero C7Q270-CB-ML User Manual

Supermicro C7Q270-CB-ML Motherboard User's Manual

Graphics Turbo IMON Current

Use this feature to set the limit on the current voltage regulator. Valid
range is 14-31. Default is 31.

Skip Scanning of External Gfx Card

Use this feature to scan for External Gfx Card on PEG and PCH PCIE Ports.
If this feature is enabled, the system will not scan for a new card. The
options are Disabled or Enabled.

Primary Display

Use this feature to select the graphics device to be used as the primary
display. Select from IGFX/PEG/PCI or select SG for switchable GFX. The
options are Auto, IGFX, PEG, PCIE and SG.

Select PCIE Card

Use this feature to select either Elk Creek 4, PEG Eval or Auto to use
on the platform.

External Gfx Card Primary Display Configuration

Primary PEG
This feature allows the user to select the primary PCI Express Graphics
(PEG) slot. The options are Auto, PEG11, and PEG12.
Primary PCIE
This feature allows the user to specify which graphics card to be
used as the primary graphics card. The options are Auto, PCIE1,
PCIE2, PCIE3, PCIE4, PCIE5, PCIE6, PCIE7, PCIE8, PCIE9, PCIE10,
PCIE11, PCIE12, PCIE13, PCIE14, PCIE15, PCIE16, PCIE17, PCIE18,
and PCIE19.

Internal Graphics

This item keeps the Internal Graphics Device (IGD) enabled, based on
setup options. The options are Auto, Enabled, and Disabled.

GTT Size

Use this feature to set the memory size to be used by the graphics
translation table (GTT). The options are 2MB, 4MB, and 8MB.

Aperture Size

Use this feature to set the Aperture size, which is the size of system
memory reserved by the BIOS for graphics device use. The options are
128MB, 256MB, 512MB, 1024MB and 2048MB.
4-22