Serial Ata Port; Hot Plug; Configured As Esata; Spin Up Device - Supermicro Supero C7Q270-CB-ML User Manual

Supermicro C7Q270-CB-ML Motherboard User's Manual
The remaining options in the section are similar across Serial ATA
Ports 0 through 5.

Serial ATA Port

This item dispays the detected SATA drive, if any.

Hot Plug

This feature designates the port specified for hot plugging. Set this item
to Enabled for hot-plugging support, which will allow the user to replace
a SATA disk drive without shutting down the system. The options are
Enabled and Disabled.

Configured as eSATA

This item dispays the eSATA status for the detected hard drive.

Spin Up Device

When this option is disabled, all drives will spin up at boot. When this
option is enabled, it will perform Staggered Spin Up on any drive this
option is activated. The settings are Enabled and Disabled.

SATA Device Type

Use this feature to identify the type of HDD that is connected to the STATA
port. The options are Hard Disk Drive and Solid State Drive.

PCH FW Configuration

4-26