System Agent (Sa) Configuration - Supermicro Supero C7Q270-CB-ML User Manual

Flow Control
Use this item to set the flow control for Console Redirection to pre-
vent data loss caused by buffer overflow. Send a "Stop" signal to stop
data sending when the receiving buffer is full. Send a "Start" signal
to start data sending when the receiving buffer is empty. The options
are None, Hardware RTS/CTS, and Software Xon/Xoff.
The setting for each these features is displayed:
Data Bits, Parity, Stop Bits

System Agent (SA) Configuration

The following will be displayed:
•
SA PCIe Code Version
•
VT-d Capability
PEG Port Configuration
PEG 0:1:0
Enable Root Port
Select Enable to activate the Root Port. The options are Disabled,
Enabled, and Auto.
4-19
Chapter 4: AMI BIOS