Supermicro Supero C7Q270-CB-ML User Manual page 117

4. After locating the new BIOS binary image, the system will enter the
BIOS Recovery menu as shown below.
Note: At this point, you may decide if you want to start with
BIOS Recovery. If you decide to proceed with BIOS Recovery,
follow the procedures below.
5. To continue with BIOS Recovery, select the item- "Proceed with
flash update." You will see the progress of BIOS Recovery as shown
on the screens below.
Note: Do not interrupt the BIOS programming until it is com-
pleted.
6. After the BIOS Recovery process is complete, click OK to reboot the
system.
Appendix C: UEFI BIOS Recovery
C-3