Viewing The Iscsi Virtual Disk Properties - Acer Altos easyStore M2 User Manual

Viewing the iSCSI virtual disk
properties
For any normal virtual disks, you can view the properties of that disk,
including the following information:
• The number of the virtual disk as it appears in Disk Management
• The size of the virtual disk
• The address of the virtual disk expressed as a port number, bus
number, target ID, and logical unit number (LUN)
• The drive letter(s) (if any) associated with the virtual disk or the
partitions of the virtual disk
• The name of the storage system where the virtual disk resides
• The name used to identify the virtual disk on the storage system
• The device ID (also known as the virtual ID)
• The protocol being used to communicate with the storage system
To view the iSCSI virtual disk properties:
1 Open SAN Disk Manager (as described in "Starting SAN Disk
Manager" on page 212).
2 In the navigation tree, expand SAN Disk Manager and click Disks.
3 In the right pane, double-click the virtual disk whose properties
you want to view.
4 Alternatively, you can right-click the disk and click Properties.
5 When you have finished viewing the properties, click OK.
221