Acer Altos easyStore M2 User Manual page 178

156
To set up e-mail alerts:
1 In the navigation bar, click Advanced.
2 Select the "Send e-mail notifications" check box.
If you clear this option, e-mail notifications will not be sent, and all
the related fields on this page appear dimmed. However, if you
previously entered information on this page, that information is
retained so that you can easily re-enable e-mail notifications later.
If you clear this option, you do not have to complete the rest of
this procedure; simply click Apply.
3 In the SMTP server name or IP address text box, enter the fully
qualified domain name or IP address of your e-mail server.
4 Select the "SMTP server authentication" check box if your e-mail
server requires authentication.
5 In the User name and Password text boxes, enter a user name and
password for logging into that server.
6 If your e-mail server cannot use the default sender e-mail address
(root@localhost), or if you want the individuals who receive e-mail
notifications to be able to reply to the alert, enter the address that
you want to appear as the return address in the Sender e-mail
address text box.
For example, you could enter your own e-mail address (such as
MyName@MyCompany.com).
7 In the First e-mail address text box, enter the e-mail address of an
individual who should receive e-mail notifications when a problem
occurs.
The e-mail address can be up to 128 characters long and must
include the @ symbol (for example, MyName@MyCompany.com).
8 If you want e-mail notifications to be sent to other individuals as
well, enter the appropriate e-mail addresses in the Second e-mail
address and Third e-mail address text boxes.
9 Click Apply.
10 When the confirmation message displays, click OK.
11 To confirm that the configuration is correct, click Test E-mail, and
click OK on the confirmation message.
This sends a test message to the specified recipients. If they do not
receive the test message, make sure that all the entries on this
page are correct. You might also have to modify the network
settings (such as the gateway to use).
4 Managing the storage system