Acer Altos easyStore M2 User Manual page 109

• The current status of each HDD:
• Linear or RAID
specified configuration.
• New — The HDD has been added to the storage system but is
not currently being used.
• Spare — The HDD is acting as a spare disk for the RAID.
• Rebuilding — The HDD is being rebuilt (for example, when a
failed disk is replaced)
• N/A — The HDD is detected but not available for use (for
example, when it has failed)
• The hotplug indicator:
• RED — Removing the HDD will cause the RAID to fail.
• YELLOW — Removing the HDD will cause RAID degradation.
• GREEN — Removing the HDD will not affect the RAID.
Note: Whenever you add or remove a HDD from the storage
system, you must click Refresh to update this page.
For detailed information about RAIDs and how adding, removing, or
swapping HDDs affects the storage system, refer to "Disk
configurations" on page 232.
You can change the disk configuration or amount of storage space
that is allocated for shared folders at any time. However, for additional
security, you must enter your administrator password to be able to
make these changes.
n
— The HDD is working properly as part of the
87