Adding A Group - Acer Altos easyStore M2 User Manual

Adding a group

In local authentication mode, when you create a group, you typically
specify which users should be members of that group, although you
can create an empty group and add users later. (You must add users as
described in "Adding users" on page 128 before you can add those
users to a group.)
Each user can be a member of multiple groups. For example, the user
Alice might be a member of both the Marketing and Executives
groups.
You can create up to 256 groups.
To add a group:
1 In the navigation bar, click Users.
2 In the left pane, click Groups.
3 Click Add.
Note: If the storage system uses Active Directory authentication
mode, this button displays dimmed.
4 In the Group name text box, enter a unique name for the group.
This name can be up to 15 characters long and can include letters,
numbers, hyphens, and underlines. It cannot begin with a period,
contain spaces, double period, or the following characters:
/ \ [ ] : ; | = , + * ? < > @ " ' # ~ ` % $
5 Specify which users should belong to this group, then click OK:
133