Network Teaming - Acer Altos easyStore M2 User Manual

252
Installing a PCI Express network card to setup

network teaming

To install a PCI Express network card to setup network teaming:
1 Turn off the system and all the peripherals connected to it.
2 Unplug all cables from the power outlets.
3 Place the system on a flat, stable surface.
4 Observe the ESD precautions on page 251 when handling a system
component.
5 Remove the system cover.
(1) Remove the three screws located on the rear panel.
(2) Slide the system cover toward the back of the chassis and lift
the cover, then set it aside.
6 Remove the expansion slot bracket.
(1) Remove the screw that secures the slot bracket to the
expansion slot.
(2) Flip open the slot cover.
8 Configuring the storage system