Contents
Contents
1
1.1
Key to symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
1.2
2
2.1
Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2.2
Data plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2.3
2.4
Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2.5
3
Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
4
Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
5
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
5.1
Siting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
5.2
5.3
5.4
6
Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
6.1
6.2
7
Shutting down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
8
9
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
9.1
9.2
20
1
Explanation of symbols
1.1
Key to symbols
Warnings
Warnings in this document are framed and identified by
a warning triangle which is printed on a grey
background.
Keywords indicate the seriousness of the hazard in terms of the
consequences of not following the safety instructions.
• NOTICE indicates that material losses may occur.
• CAUTION indicates that minor to medium injury may occur.
• WARNING indicates that serious injury may occur.
• DANGER indicates possible risk to life.
Important information
Important information in cases where there is no risk of
personal injury or material losses is identified by the
symbol shown on the left. It is bordered by horizontal
lines above and below the text.
Additional symbols
Symbol
Meaning
▶
a step in an action sequence
a reference to a related part in the document or to other
related documents
•
a list entry
-
a list entry (second level)
Table 1
1.2
General safety instructions
General information
These installation and maintenance instructions are intended for
contractors.
Failure to observe the safety instructions can result in serious injuries.
▶ Read and follow the safety instructions.
▶ Observe these installation and maintenance instructions to ensure
trouble-free operation.
▶ Install and commission heat sources and their accessories according
to the relevant installation instructions.
▶ Never use open vented expansion vessels.
▶ Never close the safety valve.
SU300/5 | SU400/5 - 6 720 800 019 (2015/04)