2.1
Installing Batteries
1. Push down on the hook of the
battery cover and pull upward.
2. Insert 4 "AA" batteries as
indicated in the battery
compartment.
3. Close the battery cover.
As soon as batteries are correctly installed, the year
flashes on the display. Refer to sub-section 2.2 to set
the date and time manually.
Note
• When the "
recommended you replace batteries.
• To replace batteries, turn your monitor off and remove all batteries. Then
replace with 4 new batteries at the same time.
• Replacing batteries will not delete previous readings.
• The supplied batteries may have a shorter life span than new batteries.
• Disposal of used batteries should be carried out in accordance with local
regulations.
2. Preparation
" symbol flashes on the display, it is
18