Omron 5 Series Instruction Manual page 31

5.2 Restoring Your Monitor to the Default Settings
To delete all the information stored in your monitor, follow the instructions
below. Make sure that your monitor is turned off.
1. While holding the
down, press and hold the
[START/STOP] button for
more than 3 seconds.
The display to the right
flashes.
2. While holding the
down again, press and hold
the [START/STOP] button
for more than 3 seconds.
The display stops flashing,
then your monitor is restored
to the default settings.
3. Press the [START/STOP] button to turn your monitor off.
button
button
31