Your monitor automatically stores up to 60 readings per user.
Note
• This monitor can be used by multiple users. Refer to sub-section 2.6 to
switch user. Make sure which user ID stores your own readings.
4.1
Viewing the Readings Stored in Memory
1. Select your user ID.
2. Press the
The Memory number appears for 1.5 seconds before the pulse rate is
displayed. The most recent reading stored in the memory will be
numbered as "1".
Note
• If the reading is high (refer to sub-section 1.3), the
"
" symbol appears.
• If there are no readings stored in the memory, the
screen to the right is displayed.
• If the memory is full, new readings will replace the
old readings, starting with the oldest reading.
4. Using Memory Function
button.
28
Alternating
date/time
display