Toshiba RS-TX20 Viewer's Manual page 92

C h a p t e r 6
In some areas, local and long
distance toll charges may apply.
®
You are responsible for any telephone
charges.
84
Phone Dialing Options
Change Dialing Options. You can change the following settings (if you make a mistake
while entering a change, use the BACK button to backspace):
Set Dial-In Number. Use this to change the number the DMS uses to make test calls
and daily calls. To change it:
1. Select "Set Dial-In Number." The Area Code screen appears.
2. Use the number keypad on the remote to set the area code, then press SELECT. If
you change the area code, or if the DMS has not made a daily call in the last twenty-
four hours, the Update Numbers screen appears and the DMS calls the TiVo service
to retrieve a list of local dial-in numbers. After the phone call, press SELECT. The
Dial-In Number screen appears.
3. Use the UP/DOWN arrow to choose one of the listed phone numbers. The DMS will
use this number to connect to the TiVo service. Then press SELECT.
If your area code has no access numbers, press LEFT arrow to return to the Area
Code screen and try a nearby area code.
4. The Dialing Format screen appears after you have chosen a dial-in number. You
should use this screen to tell the DMS which dialing format to use. For example:
should the dial-in number be preceded by your area code and should a "1" precede
the area code? In some areas, even local numbers must be dialed using the area
code. Press SELECT to return to the Phone Dialing Options screen.
To test your new dial-in number, select "Test Phone Connection Now." The Test
Phone Connection screen appears and a test phone call begins. When the call
M e s s a g e s & S e t u p