Toshiba RS-TX20 Viewer's Manual page 132

C h a p t e r 8
124
C o n n e c t i n g t o a H o m e N e t w o r k
Wireless Encryption. If you entered an alphanumeric password, you will see this screen.
Select the level of encryption used by your wireless network. If your network uses 104-bit
encryption, select 128-bit encryption. The DMS is not currently compatible with 256-bit
encryption.
Confirm Settings. Select "Accept these settings" if they are correct. For steps you can
take to troubleshoot issues with your wireless connection, see "Questions About
Networking" on page 149.
Change Connection Type. You see this screen if you are not using a shared Internet
connection to connect to the TiVo service. If your network has access to an always-on
broadband connection, select "Yes" to use it to connect to the TiVo service instead of a
phone line.
Next Step. You have completed wireless settings. If your home network has DHCP, and
you do not have a DHCP Client ID, the DMS will automatically complete network setup.
We recommend that you confirm the DHCP settings of your network by continuing with
"TCP/IP Settings for a Home Network," below.
If your home network does not have DHCP, or if you have a DHCP client ID, continue
with "TCP/IP Settings for a Home Network."
TCP/IP Settings for a Home Network
You are ready to complete TCP/IP settings if:
• You are connecting your DMS to your home network wirelessly and have already
completed "Wireless Settings for a Home Network" on page 121, or
• You have a wired (Ethernet) adapter connecting your DMS to your home network.