Toshiba RS-TX20 Viewer's Manual page 54

C h a p t e r 4
If you choose to record only one
program and it is too large to fit on a
®
single DVD, the DMS will attempt to save
segments of it to multiple DVDs.
46
R e c o r d i n g P r o g r a m s a n d D V D s
3. Choose the programs you want to save to the DVD. Programs in Now Playing that can
be saved have an empty box next to them (
red circle with a slash (
number appears in the box next to the program title: "1" for the first program you
choose, "2" for second, and so on.
• You can select as many programs as will fit on a DVD (several short programs or
fewer longer ones), up to a maximum of 24. Programs that can be saved but will not
fit on the disc with the other selected programs have a red "x" beside them (
• Programs are recorded in the order you choose them. To change the order, remove
programs from the list by highlighting them and pressing SELECT; then select
them again in the order you want them to save.
• The percentage wheel in the upper right-hand corner of the screen provides a close
estimate of how much of the DVD would be filled by the selected programs.
4. When you are ready to continue, press RIGHT arrow, or select "Done choosing
programs." If you are saving a single program that is too large to fit on a single DVD,
you see the Choose Part to Save screen. You can use the RIGHT and LEFT arrows to
change the part that will save. Press SELECT to continue.
5. If you are saving only one program, the DMS suggests using that program's name for
the DVD. You can use that name or choose to enter a name.
To name the DVD, use the arrow buttons on the remote to highlight a character, and
press SELECT to enter it. You can use the THUMBS UP
buttons to change to uppercase or lowercase letters. Select "Done entering name" when
you are finished.
); programs that cannot be saved have a
). To choose a program, highlight it and press SELECT. A
TM
).
and THUMBS DOWN TM