Optional Network - Kyocera Ecosys P3260dn Operation Manual

Setup and Registration (System Menu) > System Menu

Optional Network

Configure settings for the optional Network Interface Kit or Wireless Network Interface Kit.
NOTE
This menu is displayed when the optional Network Interface Kit or Wireless Network Interface Kit is installed.
Wireless Network
[Menu] key > [▲] [▼] key > [Optional Network] > [OK] key > [▲] [▼] key > [Wireless Network] > [OK] key
NOTE
This function is displayed when the optional Wireless Network Interface Kit is installed.
Item
ConnectionStatus
Quick Setup
AvailableNetwork
Push Button
PIN (Device)
PIN (Terminal)
Custom Setup
Netwk Name(SSID)
Connection Mode
Channel
Netwk Authentic.
When the optional Wireless Network Interface Kit is installed, you can check the wireless LAN status.
If the machine will connect to an access point that supports the automatic wireless network setup,
connection settings can be configured by Quick Setup.
Displays access points to which the machine can connect.
If the access point supports the push button method, wireless settings can be configured using
the push button. This setting executes push button, and the connection is started by pressing
the push button on the access point.
NOTE
The push button method supports only the WPS.
Starts connection using the machine's PIN code. Enter the PIN code into the access point. The
PIN code of the machine is automatically generated.
Starts connection using the PIN code of the access point. Enter the PIN code of the access point.
The detailed settings for wireless LAN can be changed. You can check the connection with a
wireless network by selecting [Connect].
Set the SSID (Service Set Identifier) of the wireless LAN to which the machine connects.
NOTE
Up to 32 characters can be entered.
Set the connection mode.
Value: Ad Hoc, Infrastructure
NOTE
Ad Hoc: Directly communicates with the device without going through an access point. This
method cannot be used to connect to two or more devices.
Infrastructure: Performs communication through an access point.
Set channel. Use [▲] or [▼] or the numeric keys to enter a number.
Value: 1 to 11
Select network authentication type. To select other options, open the device home page from a
computer.
Value: Open, Shared, WPA-PSK
8-27
Description
*1 *1
, WPA2-PSK