Job Box Setting - Kyocera Ecosys P3260dn Operation Manual

Printing from PC > Job Box Setting

Job Box Setting

Configures settings for Job Box.
1
2
Display the screen.
[Document Box] key > [▲] [] key > [Job Box Setting] > [OK] key
NOTE
If the default screen of the box is set to a Custom Box, display the Job Box screen.
[Document Box] key > [Back] key > [▲] [] key > [Job Box] > [OK] key
Configure the settings.
The available settings are shown below.
Item
Quick Copy Jobs
JobRet. Deletion
Storage Media
To maintain free space on the box, you can set the maximum number of
stored jobs.
Value: number between 0 and 300
NOTE
When 0 is set, Quick Copy cannot be used.
This setting specifies that documents, such as Private Printing, Quick
Copying, or Proof and Hold Printing, saved temporarily in the job box are
automatically deleted after they have been saved for a set time.
Value: Off, 1 hour, 4 hours, 1 day, 1 week
NOTE
This function is valid for documents saved after the function is set.
Regardless of this function setting, temporary documents are deleted
when the main power switch is turned off.
Select which storage media to use.
Value: SSD, SD Card
NOTE
This setting is not displayed if the optional SSD or SD card is not
installed.
4-21
Description