Installing The Network Interface Card (Optional) - Kyocera FS-C8026N Service Man

2BF

1-3-4 Installing the network interface card (optional)

<Procedure>
1. Turn off printer power.
2. Remove the two screws and then remove
the optional interface slot cover.
3. Insert the network interface card into the
optional interface slot.
4. Use the two screws to secure the network
interface card.
5. Connect the network cable (IB-20 and IB-
21E).
6. Configure the network interface card. (See
the IB-2x quick configuration guide.)
1-3-12
Network interface
card IB-22
(wireless LAN)
Screws
Network interface card
IB-20/IB-21E
Network
cable
Network
interface card
(connector)
Network configuration (ex. IB-22)
Item
Wireless LAN Mode Ad hoc/802.11 Ad hoc/
Infrastruccture/Automatic
SSID Any string (up to 32 characters)
Channel Depends on the environment
Encryption (WEP) DISABLE/64bit/128bit
WEP key Hexadecimal setting (00-FF)
64 bits = 10 digits
128 bits = 26 digits
Cover
Screws
Figure 1-3-17
Setting
Figure 1-3-18
Optional
interface
slot (OPT2)