Kyocera Ecosys P3260dn Operation Manual page 185

Setup and Registration (System Menu) > System Menu
Timer Setting
[Menu] key > [▲] [▼] key > [Device Common] > [OK] key > [▲] [▼] key > [Timer Setting] > [OK] key
Configure settings related to the time.
Item
Auto Panel Reset
PanelReset Timer
Sleep Level Set.
Sleep Level (models
except for Europe)
Status
Sleep Timer
Power Off Rule (models for
Europe)
If no jobs are run for a certain period of time, automatically reset settings and return to the
default setting. Select to use Auto Panel Reset or not.
Value: Off, On
NOTE
The time allowed to elapse before the panel is reset is set with the "PanelReset Timer".
PanelReset Timer (page 8-33)
If you select [On] for Auto Panel Reset, set the amount of time to wait before Auto Panel Reset.
Value: 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Auto Panel Reset] is set to [On].
-
Select the Sleep level.
Set the Energy Saver mode to reduce power consumption even more than Quick Recovery
mode.
Value: Quick Recovery, Energy Saver
NOTE
When the optional Network Interface Kit is installed, this is not displayed.
Set whether to use the Energy Saver mode for the following functions individually:
*1
• Card Reader
• Application
Value: Off, On
NOTE
When the machine enters Energy Saver, the ID card cannot be recognized.
Set amount of time before entering Sleep.
Value:
1 to 120 minutes (1 minute increments)
Sleep and Auto Sleep (page 2-25)
Select whether or not the machine enters Power Off mode for the following function.
Select [On] to set the Power Off mode.
• Network
• USB Cable
• USB Host
• RAM Disk
*2
• NIC
Value: Off, On
NOTE
Even when any of the functions is set to [On], if [NIC] is set to [Off], the machine does not enter
Power Off Mode.
Even when [Network] or [USB Cable] is set to [Off], if the machine does not communicate with
the other devices, the machine will enter Power Off Mode.
8-33
Description