Setting The Signal - Siemens WD15H547EP Instruction Manual

M

Setting the signal

S e t t i n g t h e s i g n a l
1. Activate setting mode for the signal volume
Turn to $ (Off).
2.a Set the volume for the button signals
Touch the 0 (Finish in) but-
ton until the required volume is
reached
2.b Selecting the volume for the information signals
Turn one position clockwise.
Turn one position Touch and hold the temp. °C (Tem-
clockwise. perature) button + turn one position
clockwise.
Go to step 2.b or
Touch the 0 (Finish in)
button until the required
volume is reached.
Setting the signal
Release the button,
and figure appears in
the display.
Set to $ (Off), which
exits setting mode for
the signal volume.
Set to $ (Off), which
exits setting mode for
signal volume.
en
27