Setting The Signal - Siemens WD14H421GB Instruction Manual And Installation Instructions

M

Setting the signal

S e t t i n g t h e s i g n a l
1. Activate setting mode for the signal volume
Turn to $ Off.
2.a Set the volume for the button signals (depending on model)
Touch the Finish in button until
the required volume is reached
2.b Selecting the volume for the information signals
Turn one position clockwise.
Turn one position Press and hold Temp. button +
clockwise. turn one position clockwise.
Go to step 2.b. or
Touch the Finish in
button until the
required
volume is reached.
Setting the signal
Release the button,
figure apperas in the
display.
Set to $ Off, swhich exits setting mode
for the signal volume.
Set to $ Off, which exits setting
mode for the signal volume.
en
27